#6 X 1-1/4" Toggler SnapSkru SPM MINI Self-Drilling Drywall Anchors | Without Screws | Glass-Filled Nylon (200 / Pkg.)

The TOGGLER SnapSkru is a self-drilling drywall anchor that installs with a screwdriver, no drill needed. Its Snap Lock feature gives it the behind-the-wall locking action of a toggle bolt: tightening the screw pops the anchor open behind the board and draws the gypsum into compression, reinforcing the wall rather than relying on auger threads alone. A Positive Stop resists overdrilling and an audible pop confirms it has set.

Anchors only, screws sold separately. SnapSkru SPM MINI body 1/4" (6 mm) diameter x 1-1/4" (32 mm) long, accepting #6, #7 and #8 (3.5-4 mm dia), #6 preferred.

• Glass-filled nylon, an injection-molded thermoplastic alloy that resists vibration and shock.
• Strongest hold of the TOGGLER self-drilling range.
• Removable without destroying the wall; the anchor stays in place for reuse.
• Made in the USA, RoHS compliant.

Applications

Thermostats, smoke detectors, shelving, curtain rods, towel bars, mirrors, sconces, HVAC grills, speakers, closet organizers and signage on hollow gypsum board.

Ultimate Load (lbs.)

Published values, tested with #6 x 1-1/4".

Industry safety standards recommend no more than a quarter of these values as the working load per anchor.

Specifications

• Series: SnapSkru SPM MINI
• Material: Glass-Filled Nylon
• Anchor diameter: 1/4" (6 mm)
• Anchor length: 1-1/4" (32 mm)
• Head diameter: 0.4" (11 mm)
• Screw sizes: #6, #7 and #8 (3.5-4 mm dia), #6 preferred
• Screw spec: Sheet Metal Screw (SMS), fully threaded
• Minimum screw length: 1" plus item thickness (25 mm + T)
• Drywall thickness: 3/8" to 5/8" (10-16 mm)
• Clearance behind wall: 1-1/8" minus wall thickness (29 mm minus W)
• Country of Origin: Made in USA
• Pack Quantity: 200

For double-thickness drywall (1-1/4") drill a 3/16" pilot hole first. Figures above are typical manufacturer values, verify against the application.