Sleeve Anchor, Steel Zinc Plated
Roll over image to zoom in Click on image to zoom
Sleeve Anchor, Steel Zinc Plated

Image may not reflect complete product dimensions and specifications. Please call to confirm any questions.

3/8" X 1-7/8" Sleeve Anchors | Rod Hanger | Steel Zinc Plated (50 / Pkg.)

Mutual ScrewSKU: 3730ASLRHKC
Price:
$53.65per 50( $1.07 each)
Pieces 50
Finish Zinc Plated
Length 1-7/8
Material Steel Zinc Plated
Measurement type Inch
Style Rod Hanger
Thread size 3/8
Weight 4.49 lb

WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to https://www.P65Warnings.ca.gov.

Description

A sleeve anchor is a mechanical anchor for concrete, brick and block. Tightening the nut or head draws the tapered cone into the expansion sleeve, expanding it against the hole wall along its full length so the load is spread over a larger bearing area than a stud anchor gives.

This 3/8" X 1-7/8" sleeve anchor has a 3/8" nominal diameter and an overall length of 1-7/8", sized for the embedment depth and fixture thickness that combination allows.

  • Zinc plated carbon steel for strength in dry interior and covered service.
  • Full-length expansion sleeve that spreads bearing load, making it suitable for brick and block as well as concrete.
  • Through-fixture installation: drill, drive and tighten without removing the fixture.
  • Pre-assembled nut and washer for fast, repeatable setting.

Applications

Used for mounting fixtures, brackets, conduit, handrail and light structural steel to concrete, brick and hollow or solid block.

Specifications

  • Type: Sleeve Anchor
  • Diameter: 3/8"
  • Length: 1-7/8"
  • Material: Steel Zinc Plated
  • Measurement Type: Inch
  • Pack Quantity: 50

Can We Help?

If you’re not sure that this product is right for you, give us a call!
800-222-0324

Recently viewed