Description
These 1/4" X 1-1/8" semi-tubular rivets are manufactured from Steel Zinc Plated, featuring a truss head. The shank is drilled part way from the end opposite the head, so it clinches with far less force than a solid rivet while the remaining solid shank still carries a comparable shear load. The truss head is about 50% wider than the shank, which stops it pulling through soft material.
- Material and finish: Steel Zinc Plated
- Head style: Truss Head
- Diameter: 1/4
- Length: 1-1/8"
- Head diameter: .735 - .765"
- Hole type: Type S, straight hole
- Applications: Screen and storm doors, sheet metal and soft-material assembly
Installation is with a rivet press or squeezer; the hollow shank end rolls outward to form the clinch. Select a length that leaves enough shank to form a sound head on the far side of the joint.
Specifications
- Product type: Semi-Tubular Rivets
- Material: Steel Zinc Plated
- Finish: Zinc Plated
- Head style: Truss Head
- Diameter: 1/4
- Length: 1-1/8"
- Shank diameter: .239 - .247"
- Head diameter: .735 - .765"
- Head thickness: .100 - .120"
- Hole diameter at end of rivet: .170 - .184"
- Hole depth to start of apex: .250" nominal
- Length tolerance: plus or minus .010"
- Hole type: Type S, straight hole
- Measurement type: Imperial
- Pack quantity: 1,000 per package
Dimensions above are the manufacturer's published figures for the 1/4" nominal size, which sits outside the ASME B18.7 range and is not covered by that standard. Sold by the package in the quantity shown. Contact us for volume pricing, a matching setting tool, or help selecting a size for your material stack-up.
Can We Help?
If you’re not sure that this product is right for you, give us a call!
800-222-0324