Gemtor TB1101LY10 Energy Absorbing Lanyard | 100% Tie-Off | Tie-Back | Soft-Pack Energy Absorber | 10' | Polyester

The Gemtor TB1101LY10 is a energy absorbing lanyard featuring 100% Tie-Off, Tie-Back, Soft-Pack Energy Absorber.

• 100% Tie-Off
• Tie-Back
• Soft-Pack Energy Absorber
• 10'

Specifications

• Manufacturer: Gemtor
• Model: TB1101LY10
• Product Type: Energy Absorbing Lanyard
• Series: TB Series Tie-Back
• Material: Polyester
• Weight: 2.5 lbs
• Unit of Sale: Each

Safety

• OSHA limits fall arrest forces on a worker wearing a full-body harness to 1,800 lbs.
• Gemtor recommends using an energy absorber whenever the possibility of a free fall exists, to keep arrest forces below the OSHA limit.
• An energy absorber can increase fall arrest distance by up to 42". Confirm the available fall clearance permits its use.
• Tie-back lanyards are designed so the webbing may be wrapped around an OSHA compliant structural support and the automatic locking carabiner snapped back onto the lanyard.

Important Notice

Fall protection equipment must be selected, inspected, used and maintained in accordance with the manufacturer's instructions and all applicable OSHA and ANSI requirements. It is the responsibility of the purchaser and the end user to determine the suitability of this product for the intended application, to ensure that users are trained in its proper use, to inspect the equipment before each use, and to remove from service any equipment that has been subjected to a fall or shows signs of wear or damage. Mutual Screw & Supply distributes this product as supplied by the manufacturer and assumes no liability for injury, loss or damage arising from improper selection, use, misuse, alteration, or failure to observe the manufacturer’s instructions or applicable safety regulations.