3/8-16 Steel Drop-In Anchors
Product Detailed Description
3/8-16 Steel Drop-In Anchors
- 1/2" Hole Diameter
- 5/8" Thread Length
- 1 9/26" Minimum Embedment
- One setting tool per box
- Ultimate Tensile (lbs.) 3995
- Ultimate Shear (lbs) 3714
- FF-S325 Group VIII, Type 1
A two-piece, internally threaded expansion anchor with four equally-spaced longitudinal slots extending from the bottom end of the outer shield, inside of which sits a pre-assembled dilating plug. The bottom lip of the anchor is tapered. It is permissible for a section of the shield to be knurled, to increase the gripping action of the anchor
Applications/ Advantages
Intended for flush mounted, medium to heavy-duty applications in solid materials such as stone and concrete. It can be used in, but are
not limited to, overhead assemblies such as duct work and pipe hangers because the internal plug holds its position. Can also be used to anchor handrails and floor-mounted door stops
Material
Anchor body: AISI 12L14 cold rolled steel
Expander Plug: AISI 12L14/1215 cold rolled steel, case-hardened and tempered
Anchor body: 303 Stainless steel Expander
Plug: 303 Stainless steel
Anchor Spacing
Anchors should be installed a minimum of ten anchor diameters between each other and a minimum of five anchor diameters from the edge
Depth of Hole
Should be at least equal to the length of the anchor
Tensile and Shear Strengths
The suggested safe working load is one-fourth the average proof test loads shown in the above table
This Mutual Screw & Supply 37ADR typically ships within 24 to 48 hours
Related Products |
![]() 3/8 Drop-In Anchor Setting Tools $5.13 |
Have questions or need more information about our 'Steel Drop-In Anchors', please contact us? |