Maxxeon WorkStar® 314 UV 395nm Leak Detection Penlight/Inspection Light (520mW)

Maxxeon WorkStar® 314 UV 395nm Leak Detection Penlight/Inspection Light (520mW)

Practical

The MAXXEON WorkStar® 314 fits nicely in your hand, but it also fits your pocket perfectly - a true everyday carry UV leak detection penlight! The WorkStar® 314 is up to 20 times brighter than ordinary UV inspection lights, thanks to the special high performance UV LED. The new 3X zoom lens adds extra flexibility to adjust the beam width to suit the application — and the applications are almost endless:

  A/C refrigerant dye leak detection

  Fluorescent hand stamp verification

  Dog, cat & rodent urine stain detection

  Hunters following animal trails (urine)

  Restroom cleanliness inspection

  Document and lab analysis

  Crime scene investigation

  Hairline crack detection

  Paint authentication

  Currency verification

  Bacteria detection

  Gem inspection

  UV curing

  Even scorpion hunting

Performance

With an output of 520mW and a run time of 30 minutes continuous operation, the MAXXEON WorkStar® 314 is brighter and longer lasting than ordinary UV LED inspection lights. At 395nm, the WorkStar® 314 is a true UV penlight that is compatible with all (395nm) fluorescent leak detection dyes, unlike some of the competition that use 420nm violet LEDs. Just as important is the size of the beam. The 314's beam is much wider than competing LED penlights, without any hot spots or shadows. In addition, the 314 penlight has a 3X zoom lens, so you can adjust the beam width to suit the situation. It uses constant current electronics to extract the maximum run time from 2 AAA Alkaline batteries.

  CAUTION: 

Wear 100% UVA blocking safety glasses when using the WorkStar® 314. Do not shine the light in anyone's eyes.

 

  LIMITATION ON LIABILITY: 

In no event shall Maxxeon Inc. be held liable to any party for any direct, indirect, special or other consequential damages for any use or misuse of this flashlight, including, without limitation, any damage to persons or property, through direct or indirect use.

Professional

The rugged WorkStar® 314 UV 395nm leak detection inspection light is compatible with all (395nm) fluorescent leak detection dyes and is designed for daily use by professionals in demanding shop, manufacturing and maintenance environments. The tough aluminum body is anodized violet and is virtually indestructible. All threaded joints have rubber O-ring seals so it is IP67, dust tight & waterproof to 3 ft. The rugged side switch is rated at 100,000 cycles and is sealed to avoid contamination by dirt and grit.

LED Brightness: (Radiant Flux) 520 mW (1X Zoom), 360 mW (3X Zoom)

LED Wavelength, Power: UltraViolet (UVA) 395 nm nominal (390-400 nm), 1 W

Zoom Lens: Glass lens slides back and forth allowing you to focus the beam on your work area. The zoom adjusts from wide beam with no rings, shadows, or hot spots to handy narrow beam. The beam diameter to distance ratio ranges from 1:1 to 1:3, meaning at 2 ft from an object, the minimum zoom beam is about 2 ft wide and the maximum zoom beam is about 8 in wide. In other words, it has 3X zoom at maximum, relative to minimum.

Switch: Click ON/Click OFF, side mounted for convenient thumb operation

Battery Included: 2 AAA alkaline

Run Time: Alkaline - 30 min continuous operation & 2 hr with typical intermittent use

Aluminum Body & Head: Aluminum with Violet Type II Anodizing

Length: 5 inches (13 cm)

Diameter: 5/8 inches (16 mm) maximum

Weight: 2 ounce (57 grams)

Temperature: 15º to 105ºF (-10º to +40ºC)

Ingress Protection: IP67 = dust tight & waterproof to 3 ft (1 m) - rubber O-ring seals

Drop Test: 6 ft (2 m)

Included: WorkStar® 314, 2 AAA alkaline batteries

Warranty: 1 year against manufacturing defects

Have questions or need more information about our 'Maxxeon WorkStar® 314 UV 395nm Leak Detection Penlight/Inspection Light (520mW)', please contact us?