12 Items 94 Pieces Plastic Case Internal Retaining Rings Stainless Steel Kit

Assortment Sizes

• 1/2"
• 5/8"
• 11/16"
• 3/4"
• 13/16"
• 7/8"
• 1"
• 1-1/6"
• 1-1/8"
• 1-1/4"
• 1-3/8"
• 1-1/2"

Since 1947
SKU: 06455SF Product Size: 12 Items 94 Pieces Plastic Case Weight: 1 lb Condition: New
$118.23 for 1 piece

Add to Wish List

Internal Retaining Rings PH 15-7 Stainless Steel Type HO Kit

  Plastic Case Measurements: 11" Wide X 6-3/4" Deep X 1-3/4" Height

  Precipitation Hardened Alloy 15% Chromium, 7% Nickel, 2% Molybdenum

  Hardness Sizes 25 & 31: Rockwell 15N 82.5-86
                Sizes 37 - 102: Rockwell 30N 63-69.5
                Sizes 106 & over: Rockwell C44-51

  Tensile Strength:  225,000 psi. minimum

  A ring-shaped stamping with one opening on the circumference.  The two ends at the opening are called lugs and flare slightly into the groove.  When the lugs are released, contact is made with the grooved housing.

  Tapered section design assures constant moment and, therefore, uniform circular deformation; allows for complete contact and tightness in groove.  The internal design is for axial installation into machined grooves in housing and bores.  Steel rings can be safely used within a temperature range of -100°F to 500°F.

  Retaining rings are heat treated using the austempering method. Rings are uniformly heated to temperatures over 1500°F.  They are then isothermally quenched in a molten salt bath at 600°F for 35 minutes.  This results in parts with a bainite structure characterized by good mechanical properties.

MutualScrew.com has the largest selection of BOLTS, NUTS, SCREWS and WASHERS on the internet

This Mutual Screw & Supply 06455SF Retaining (Snap) & E Ring Kits typically ships within 24 to 48 hours