5/16-18 X 7 1/2 Hex Head Cap Screw Stainless Steel
Product Detailed Description
18/8 Stainless Steel - USS Coarse Thread
- Manufactured to ASME B18.2.1 dimensions
- Used in products that require general atmospheric corrosion resistance, such as chemical and food-processing equipment
- Some chemical environments may require special corrosion resistant materials and precautions
- A cap screw made from one of the following austenitic alloys: 303, 303Se, 304, XM7, all of which are characterized as having a chromium content of 17-19% and nickel content of 8-10%
- The austenitic alloys develop their strength through work hardening during the fastener manufacturing process, as seen from the hardness properties below. The only heat treatment normally available on austenitic stainless alloys in annealing, which is done at approximately 1900°F to a dead soft condition and is not normally thermally reversible
- Manufactured to ASME B18.2.1 dimensions
Hardnes
1/4" through 5/8" diameter: Rockwell B95-C32 3/4" through 1" diameter: Rockwell B80-C32
Yield Strength
1/4" through 5/8" diameter, 2.25D and longer: 65,000 psi. min. 3/4" (2.25D & longer) & 7/8" through 1" diameter (3D & Longer): 45,000 psi. minimum
Tensile Strength
*1/4: through 5/8" diameter, 2.25D and longer: 100,000 - 150,000 psi. 3/4" (2.25d & longer) & 7/8" through 1" diameter (3D & longer): 85,000 - 140,000 psi.
Elongation in 4D
1/4" through 5/8" diameter: 20% minimum; 3/4" through 1" diameter; 25% minimum
Thread Length
Double the diameter plus 1/4" up to 6" length
D=Normal diameter of the screw in inches
*These properties are tested only on machined specimens when the testing machine cannot provide for full testing of the parts
This Mutual Screw & Supply 31120CH188YW 5/16-18 Stainless Steel Hex Head Cap Screws typically ships within 24 to 48 hours
Have questions or need more information about our 'Hex Head Cap Screw Stainless Steel', please contact us? |