Dentec Safety IAA Fit Test Kit w/ Banana Oil & OV Cartridges

Dentec Safety IAA Fit Test Kit w/ Banana Oil & OV Cartridges

SKU: 79240 Weight: 1 lb Condition: New
$240.98 for 1 Kit
Minimum Quantity - 6

Add to Wish List

Dentec Safety IAA Fit Test Kit w/ Banana Oil & OV Cartridges

    Please contact OHD for pricing and delivery https://ohdusa.com/fit-test-adapter/.
INSTRUCTIONS:
    Prop open or remove the inhalation valve on the mask side that will contain the adapter with two connections.
    Push and twist-to-lock both adapter pieces onto each side of the mask in place of the cartridge/filter. The side with the double connections must have the inhalation valve propped open or removed.
    Connect the clear tubes to the two-connector side and the blue tube to the single connector side (Fig. 2).
    Perform fit test.
CARE:
    The adapters should be handled with care so as not to create damage that might interfere with testing.
    Periodically check the metal hose connectors to be sure they are secure.
    If the diaphragm should leak on the single-port side of the adapter, remove 8 screws on top, carefully line up new diaphragm, screw in the screws loosely. Tighten opposite sides until all are secure.
    Adapters may be cleaned with soapy water and soft cloth.

Fit Test Kit, IAA, includes Banana Oil, (2) OV Cartridges, Instructions

This Dentec Safety 79240 Respirator Training & Testing Packs typically ships within 24 to 48 hours