Cendrex 22" x 30" Fire Rated Insulated Access Door w/ Exposed Flange

Cendrex 22" x 30" Fire Rated Insulated Access Door w/ Exposed Flange

This product requires special freight shipping rate

SKU: PFI-2230 Weight: 31.9 lbs Condition: New
Regular Price: $285.10
On Sale! $270.85 for 1 Access Doors
This product requires special freight shipping rate

Add to Wish List

Cendrex 22" x 30" Fire Rated Insulated Access Door w/ Exposed Flange

    The fire-rated insulated access door can be installed on fire-rated walls and ceilings.
SPECIIFICATIONS
    Installation: Walls & ceilings.
    Material: 20-gauge galvanneal steel door and 16-gauge cold rolled steel frame
    Hinge: Continuous piano hinge. Hinge location: Hinges must be located on the second dimension (height).
    Locking mechanism: Self-latching tool-key operated slam latch and ring-operated slam latch, both included.
    Flange: 1" exposed flange, made of cold rolled steel
    Frame: 2½ " in depth, made of cold rolled steel
    Rough opening: Door sizes + ¼" or + 6mm
    Insulation: 2" thick fire rated mineral wool
    Inside panel release: Mechanisms to allow panels to open from inside, standard on all doors over 12" X 12 inches.
    Finish: High quality white powder coat primer.
    Packaging: Individually wrapped, 1 door per box.
Fire rated access doors, for wall assembly use, are subject to the following:
     Certification: UL 10B (2009), NFPA 252 (2012), CAN/ULC S104 (2010).
     Rating Achieved: 3 hours, neutral/negative pressure
     Maximum size: 48" x 48" (1219mm x 1219mm), maximum area of 2304 in², tolerance on height and width limitation is more or less 3" (76mm) as long as the area does not exceed 2304 in².
     Temperature rise: 250°F (121°C) after 30 minutes and 450°F (232°C) after 60 minutes.
Fire rated access doors, for ceiling assembly use, are subject to the following:
    Certification: ASTM E119 (2012), CAN/ULC S101 (2007)
    Rating Achieved: 3 hours in non-combustible construction and 1 hour in combustible construction
    Maximum size: 24"X36" (610 mm X 914 mm) (hinges and latches on the side of 36"), tolerance on dimension limitations are more or less 3" (76 mm) as long as the area does not exceed 864 in².
     Temperature rise: Within allowable per ASTM E119 and CAN/ULC S101